APPROVALS TECHNICAL SPEC MAIN MENU
SAPTEX manufactures rigid polyurethane foam in a wide range of densities for different applications.
- Density 30 to 60 kg/m3 normally for pips and duct insulation.
- Density 80 to 220 kg/m3 generally for thermal supports.
SAPTEX polyurethane foam is used in man different application i.e. hot & cold water pipes, heating & air-conditioning ducts and industrial process pipe work. PUR foam meets the requirements of national, regional and international standard! Specifications if higher performance level is required. SAPTEX can supply foam meeting most stringent properties where higher service temperatures ad/or better performance is required. We recommend using SAPTEX PIR pipe and ducting insulation. SAPTEX PIR pipe and duct insulation. SAPTEX PUR is Polyisocyanurates foam, which fulfils the highest fire of rigid cellular foams.
SLABS PIPE SECVTIONS PIPE FITTINGS including elbows, tees, valve covers, etc.
BEVELLED SEGMENTS for Vessels, Tanks etc.
30 kg/m3, 40 kg/m3 and 60 kg/m3 normally for pipe, fittings and slabs.
80 kg/m3, 100 kg/m3, 120 kg/m3 and above for thermal supports, or any other special application.
Pipe sections and fittings of any outer diameter, with length 1000 mm.
Pipe Sizes over 100 mm are made from segments.
Slabs 1200 X 1000 mm, 1200 mm X 2000 mm or requested sizes.
Polyurethane foam is vermin and rodent proof and insert to most chemicals.